Many friends may think that the gas-hydraulic pressurization cylinder is a product that combines the advantages of the cylinder and the cylinder, and the pure gas is the driving source, so its control mode is pure pneumatic control. In fact, this is not the case, pure pneumatic control is a more common control mode of gas-liquid pressurized cylinder, and there is a more common control mode: electronic control. Next, Sentuo will talk about what accessories are needed for the pneumatic hydraulic booster cylinder electronic control mode!
Operation of electric control of gas-hydraulic booster cylinder: start the button with both hands
Pneumatic hydraulic booster cylinder electric control required accessories:
1, solenoid valve: 2; One controls the preload stroke and the other controls the boost stroke.
Note: If the prepressure part needs to adjust the mold, use three-position five-way solenoid valve (middle-sealed type); Otherwise, use the two-position five-way solenoid valve.
2, trachea: 4.
3, muffler: 4 (reduce noise)
4, connectors: 10 (four connected to the pressurizing cylinder gas pipe,6 connected to the solenoid valve)
5, two couplings: 1 (connected to the front end of the pressurized cylinder intake air source).
6, electric control box: 1 (used to control the conversion work of two solenoid valves, which takes time to break electrical appliances, intermediate relays, etc.)
If you need to replace the foot stomping operation, the solenoid valve and air control valve can be assembled on the logic seat, and then connected to the foot switch.
Tex/Fax: 0086-577-62840011
WhatsApp: 0086-13355775769
#tourniquetpneumatic#pneumaticdevice#apneupneumatic#pneumaticcrimperr
#wisseuxpneumat#valvepneumatic#pneumaticpads#pneumatictracea
