Applications -

Cylinder application field introduction

Pneumatic technology is one of the key technologies of modern mechanical transmission and control. As a typical pneumatic component, air cylinder has a very wide range of applications in modern machinery. The application fields of air cylinder include printing (tension control), semiconductor (spot welding) machine, chip grinding), automation control, robots, etc.

Cylinder type: pneumatic actuator that converts the pressure energy of compressed gas into mechanical energy in pneumatic transmission. There are two types of cylinders: reciprocating linear motion and reciprocating swing. Cylinders for reciprocating linear motion can be divided into four types: single-acting cylinder, double-acting cylinder, diaphragm cylinder and impact cylinder.

1. Single-acting cylinder: There is only one end of the piston rod, the air is supplied from the side of the piston to generate air pressure, and the air pressure pushes the piston to generate thrust to extend, and returns by spring or its own weight.

2. Double-acting cylinder: alternately supply air from both sides of the piston to output force in one or two directions.

3. Diaphragm type cylinder: The diaphragm is used instead of the piston, the force is only output in one direction, and the spring is used for reset. It has good sealing performance but short stroke.

4. Impact cylinder: This is a new type of element. It converts the pressure energy of the compressed gas into the kinetic energy of the high-speed (10-20 m/s) motion of the piston, so as to do work. 5. Rodless cylinder: a general term for cylinders without piston rods. There are two types of magnetic cylinders and cable cylinders. The rodless cylinder has a large bearing capacity and anti-torque capacity with a cylinder diameter of Φ10mm~Φ80mm,

Product Description:
According to the specific requirements and needs of customers, the company customizes cylinders with different cylinder diameters and strokes, cylinder flanges, single-ear and double-ear cylinders, as well as standard cylinder air rods and cylinder extended air rods, etc. The compressed air enters the air source treatment element, and after water separation, filtration, decompression, and lubricating oil treatment, dry, clean and lubricated air with a certain pressure enters the cylinder through the solenoid valve. The solenoid valve receives the signal of the electric control cabinet, controls the action of the cylinder, and realizes automatic processes such as cold air, ash unloading, offline ash cleaning, and return blowing conversion. Standard cylinders can be divided into: 63, 80, 100, 125 specifications. The normal working conditions of the cylinder: the medium and ambient temperature are -5~70℃, the working pressure is 0.1~1Mpa. The speed range of the cylinder is 50~500mm/S. Solenoid valve K25JD to 25 series two-position five-way stop valve It can be divided into five-port two-position/five-port three-position series specifications, and the solenoid valve with suitable diameter, voltage, connecting thread and installation form should be selected according to the project requirements. It can also be selected according to the actual use.

China’s first 7-day delivery pneumatic factory, can be customized on request.

Product