- Dust When the cylinder is used in a dusty environment, the dust cap should be set on the piston rod. A single cylinder hole breathing filter should be installed to prevent dust from being sucked in from the breathing hole.
- The lubricating oil mist of the cylinder required for lubrication is selected to deal with the acyclic expansion and contraction, and the moisture in the air and the lubricating oil without emulsification.
- Take over the pipe in the dirt that must be clear before the cylinder access pipe to prevent debris from entering the cylinder.
- Ambient temperature Typically, the cylinder has a predetermined operating temperature of 5°C-60°C. In the case of a cylinder below 5°C, it is sometimes disadvantageously affected by the condensation of moisture contained in the compressed air to the cylinder’s operation. At this time, the compressed air requirement of the qgb cylinder is 5℃ lower than the dew point temperature of the ambient temperature; to prevent water vapor from condensing in the compressed air. Taking into account the type of sealing and lubrication at low temperatures.
If the cylinder you use is in these environments, you need to focus on it.
Valve
Reliable 2/2-Way Solenoid Water Valve
2/2-Way Solenoid Water Valve – Simple On/Off Control. A 2/2-Way Solenoid Water Valve provides reliable on/off fluid control. Learn its key features and where it
陈薇薇 October 24, 2026
